Sound Design Stack Exchange
Sound Design Stack Exchange

Questions tagged [mixer]

A mixer is used to mix (add) audio signals by varying amounts. Mixers can be hardware or software and can vary from small software tools to large physical desks. See "mixing" tag for more. Use for questions related to the use of mixers.

220 questions
3
votes
1 answer

Using the digital snake with the X32

If I use one S16 digital snake with the X32, can I route it with channels 17 thru 32 and outputs 9 thru 16?
user13418
  • 31
  • 2
3
votes
2 answers

How do I hear the metronome in my ears without the audience hearing it?

I'm looking to get this mixer - this one And I'll have the whole band hooked up to in ear monitors so we can hear all of the instruments/vocals and metronome. But is it possible to have the metronome not come out of the speakers? Only go into our…
user7509
  • 89
  • 6
2
votes
1 answer

Multiple IEM mixes / multiple transmitters?

I'm wondering how to have multiple IEM mixes. So the drummer hears a mix different than the lead vocals mix. I know one way to do this is, pan some instruments left and right and send mono signals to the transmitters... But what about multiple…
user7509
  • 89
  • 6
2
votes
2 answers

Is a mixer a necessary part of this setup?

I am trying to set up DJ equipment for small/medium sized rooms (See previous question for background). My equipment is going to be as follows: Laptop(s), iPad(s) playing music (No CDs No Vinyl) Powered Speakers Do I really need a Mixer if I have…
Raj More
  • 175
  • 6
2
votes
1 answer

How to best sum 32 microphones to 4 lines

I need to find a way (not using a large mixer on stage) to sum 32 microphones to 4 lines. In a small package (preferably rack mounted). Per now I use a large soundcraft mixer and aux sends. It pains me each time I have to rig up the mixer just to…
AlexanderBrevig
  • 201
  • 1
  • 2
1
vote
1 answer

Behringer Xenyx 1002 mixer to Crown CTs2000 amp

Do I have to use both the R and L main output on the Behringer Xenyx 1002 mixer to the channel 1 and channel 2 input on the Crown CTs2000 amplifier? I would rather use just one output on the mixer and one input on the amplifier if possible. The…
ADG
  • 11
  • 2
1
vote
2 answers

How to connect with computer

I have Yamaha MG10XU MIXER wondering how to connect it with computer? I have cable for it and tried to connect it but didn't see any output. Is there any software require for it? It didn't come with any software Thx
K. Parmar
  • 61
  • 1
  • 1
  • 4
1
vote
1 answer

Line in 5/6 sounds awful

Bought a Behringer XENYX1202. When I plug in a 1/4 cable into the mic lines (1-4), everything sounds fantastic. However, when I plug the same cable into 5/6 it sounds pretty awful until I pull it out part way, and then it sounds better. Are…
Drew Rush
  • 113
  • 4
0
votes
2 answers

What are 2T lines for?

I am studying the manual of an old Phonic MM1705 mixer. Then I see 4 RCA connectors: 2 for 2T RTN and 2 for 2T REC. From the manual, they are used together for recording to audio cassette (see below). Thus, 2T RTN line seems a sort of feedback line…
Enrico R.
  • 3
  • 1
0
votes
1 answer

Can I independently control volume of MIX and PHONES on the Behringer XENYX 1202 mixer?

I am total beginner in the world of audio gear and recently find myself learning to play the piano. As I mostly get to play in the evenings when the family are sleeping, I want to be able to use headphones to listen to both the piano, and the output…
Cylindric
  • 101
  • 2
0
votes
1 answer

MIXER - How to convert PC headphone to Line in Signal?

Im trying to connect my computer to a mixer board. When I connect it to the mixer from PC i get a very bad sound (sounds distorted or some sort). Bad sound diagram: (PC headphone) --> 3.5mm cable --> 1/4 Adapter --> Mixer Line in (neutrik xlr trs…
user1148967
  • 3
  • 3
0
votes
1 answer

Amping indoor and outdoor speakers

I'm helping a friend with their resturant. They have indoor and outdoor passive speakers connected to a single amp. How can I go about making the outside louder with out making the inside loud. Do I need to seperate amps or do I need some kind of…
Flo
  • 101
  • 1
0
votes
1 answer

Can I use a powered mixer as an unpowered mixer via the effects loop output?

Using the 1/4" Line Out of an Effects Loop, can I use a powered mixer as an unpowered mixer without damaging the mixer? I understand I would never send the speaker outputs from a powered mixer to active monitors, but don't know if this is a safe…
Bruce Reich
  • 3
  • 2
0
votes
1 answer

Can I assign the left side of a stereo channel to both subgroups in a stereo set and assign it stereo in a different set?

I have a Behringer x2442usb mixer which has a stereo effects unit. I would like to be able to assign the effect to both sub-groups 1-2 and 3-4, with subgroup 1-2 for left channel only while subgroup 3-4 would be a stereo pair. Is there a way that I…
user8241
  • 1
0
votes
2 answers

A budget audio interface with surface controls and multi-track recording ability

I'm currently trying to find an interface which meets my needs for podcast recording. The needs are as follows: at least 2 XLR microphone inputs. at least 3 line inputs for recording turntables or other line audio. the ability to record all tracks…
shennan
1
2