Do I have to use both the R and L main output on the Behringer Xenyx 1002 mixer to the channel 1 and channel 2 input on the Crown CTs2000 amplifier? I would rather use just one output on the mixer and one input on the amplifier if possible. The amplifier has a "Y" switch to put the same signal on both channels. I am hooking up a 70v system so I just need a mono signal. I guess I'm asking if that would hurt the mixer in any way?
Asked
Active
Viewed 98 times
1 Answers
1
No, you can send the left channel from the mixer to the amp and link the two amp channels with no problem. The result will be a mono signal in two channels as you describe yourself.
bjelleklang
- 466
- 2
- 10