How to disable repeating continuation of section header in Latex Curve for CV

Question

I am using Curve for my CV and every time a section goes beyond one page, its header will be repeated on the next page. Could anyone please tell me how could I disable this "feature"? I refer to this Q&A and could make the word "continued" disappeared, but couldn't figure out how to make the entire repeating header gone. A sample PDF using the same curve package can be viewed here. Thanks for your help <3

main file:

%%%%%%%%%%%%%%%
% This CV example/template is based on my own
% CV which I (lamely attempted) to clean up, so that
% it's less of an eyesore and easier for others to use.
%
% LianTze Lim (liantze@gmail.com)
% 16 September, 2016
%
\documentclass[a4paper,skipsamekey,11pt,british]{curve}
% Uncomment to enable Chinese; needs XeLaTeX
% \usepackage{ctex}
\usepackage{settings}
% Change the fonts if you want
\ifxetexorluatex % If you're using XeLaTeX or LuaLaTeX
  \usepackage{fontspec}
  %% Warning: EB Garamond contains no bold!! Substituting for Junicode Bold, but may not look nice nor consistent!!
%   \setmainfont[Ligatures=TeX,SmallCapsFeatures={Letters=SmallCaps,LetterSpace=5},BoldFont=Junicode Bold]{EB Garamond}
  %% Charis SIL's rather nice, actually.
  \setmainfont[Ligatures=TeX,SmallCapsFeatures={Letters=SmallCaps,LetterSpace=5}]{Charis SIL}
  \setsansfont[Ligatures=TeX]{Lato}
  \setmonofont{Inconsolata}
\else % If you're using pdfLaTeX or latex
  \usepackage[utf8]{inputenc}
  \usepackage[T1]{fontenc}
  \usepackage[tracking=smallcaps]{microtype}
  \usepackage{fbb}
  \usepackage[type1]{cabin}
  \usepackage[varqu,varl]{zi4}
  \useosf  %% Comment out if you prefer lining figures rather than old style figures
\fi
\usepackage{csquotes}
%% Only needed if you want a Publication List
\addbibresource{own-bib.bib}
%% Specify your last name and first name (as given in the .bib) to automatically bold your own name in the publications list. One caveat: You need to write \bibnamedelima where there's a space in your name for this to work properly for now...
% \myname{Lim}{Lian\bibnamedelima Tze}
\myname{d'Andrimont}{Raphaël}
% Change the page margins if you want
% \geometry{left=1cm,right=1cm,top=1.5cm,bottom=1.5cm}
% Change the colours if you want
% \definecolor{SwishLineColour}{HTML}{00FFFF}
% \definecolor{MarkerColour}{HTML}{0000CC}
% Change the item prefix marker if you want
% \prefixmarker{$\diamond$}
%% Photo is only shown if "fullonly" is included
\includecomment{fullonly}
% \excludecomment{fullonly}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\leftheader{%
  {\LARGE\bfseries\sffamily Arif Yulianto, S.Kom.}
\makefield{\faCircleO}{\url{Bandung, 2 July 1994}}
\makefield{\faEnvelopeO}{\texttt{arify@outlook.co.id}}
  \makefield{\faTwitter}{\texttt{@bangarify}}
\makefield{\faGlobe}{\url{http://www.devarify.org/}}
  \makefield{\faPhone}{\texttt{081222300542}}
\makefield{\faLinkedinSquare}
  {\url{http://www.linkedin.com/in/arifyulianto/}}
}
\rightheader{~}
\begin{fullonly}
\photo[r]{arifyulianto.png}
\photoscale{0.30}
\end{fullonly}
\title{Curriculum Vitae}
\begin{document}
\makeheaders[c]
\makerubric{employment}
\makerubric{education}
\makerubric{organizational}
\makerubric{project}
\makerubric{achievment}
\makerubric{skills}
\makerubric{interest}
%\makerubric{misc}
%\makerubric{referee}
% \input{referee-full}
\end{document}

settings.sty:

\RequirePackage{silence} \WarningsOff[longtable] \WarningsOff[array]
\usepackage{ifxetex,ifluatex} \newif\ifxetexorluatex \ifxetex   \xetexorluatextrue \else   \ifluatex
    \xetexorluatextrue   \else
    \xetexorluatexfalse   \fi \fi
\RequirePackage{graphicx} \RequirePackage[hyphens]{url} \RequirePackage[main=british]{babel} \raggedright
\RequirePackage{fontawesome}
\newcommand{\smallcaps}[1]{\textsc{\lowercase{#1}}}
\RequirePackage[a4paper,nohead,nofoot,hmargin=2.25cm,vmargin=2cm]{geometry} \RequirePackage{relsize} \RequirePackage[dvipsnames,svgnames]{xcolor} \RequirePackage{tikz} \usetikzlibrary{shapes,shadows}
\RequirePackage{comment} \definecolor{SwishLineColour}{HTML}{88AC0B} \definecolor{MarkerColour}{HTML}{B6073F}
% If you're not a researcher nor an academic, you probably don't need biblatex; delete this line. % \RequirePackage[backend=biber,bibstyle=apa,sorting=ydnt,uniquename=init,maxnames=7,defernumbers=true]{biblatex} % list of styles here: https://www.sharelatex.com/learn/Biblatex_bibliography_styles \RequirePackage[backend=biber,sorting=ydnt,uniquename=init,maxnames=7,defernumbers=true,indexing=true]{biblatex} \DeclareLanguageMapping{british}{british-apa}
\RequirePackage{tikz} \newcommand*\circled[1]{\tikz[baseline=(char.base)]{    \node[shape=circle,text=white,fill=MarkerColour!80!black,font=\sffamily\scriptsize\bfseries,inner sep=1pt,text height=1.35ex,minimum width=1.5em,text centered] (char) {#1};}}
    \newcounter{bibitem}
% bring back this line if want to show sub-number inside circle for bib items % \AtBeginBibliography{\setcounter{bibitem}{1}} % \AtEveryBibitem{\makebox[2.5em][l]{\circled{\thebibitem}\stepcounter{bibitem}}}
% \renewcommand{\bibfont}{\small} \setlength{\bibitemsep}{1.5ex} \setlength{\bibhang}{2.7em} \NewBibliographyString{retrieved} \NewBibliographyString{from} \DefineBibliographyStrings{british}{   from = {\textcolor{MarkerColour!80!black}{\faLink}},   retrieved = {} }
\headerscale{1} %\setlength{\headerspace}{6pt} \rubricfont{\Large\bfseries\sffamily} \setlength{\rubricspace}{2pt} %\setlength{\rubricafterspace}{-9pt} \setlength{\rubricafterspace}{-3pt} \setlength{\subrubricspace}{3pt} \setlength{\subrubricbeforespace}{4pt} \def@@rubrichead#1{%   \begin{tikzpicture}[baseline]%\   \shade[left color=SwishLineColour!60!white, right color=white] rectangle (@almosttextwidth,2.5pt);   \node[font={@rubricfont},inner sep=0pt,text ragged,anchor=south west,text depth=.5ex,text height=1.5ex] at (1pt,2pt) {#1};   \end{tikzpicture}%   \vspace\rubricspace% }
\subrubricfont{\large\bfseries\sffamily} \subrubricalignment{l}
\newcommand{\makefield}[2]{\makebox[1.5em]{\color{MarkerColour!80!black}#1}
#2\hspace{2em}}
\keyalignment{r} \rubricalignment{l} \renewcommand{\arraystretch}{1.25} \urlstyle{tt}
\newcommand{\prefixmarker}[1]{\def@prefixmarker{#1}} \def@prefixmarker{\relscale{.9}\faBookmark}
\prefix{%   \hspace{-1ex}   \color{MarkerColour!80!black}@prefixmarker%   \hspace{1ex}% }
\newcommand{\makerubrichead}[1]{\vskip\baselineskip@@rubrichead{#1}}
\defbibheading{subbibliography}{\vskip\subrubricbeforespace{@subrubricfont\hspace{3pt}#1}\par}
\defbibfilter{booksandchapters}{% ( type=book or type=incollection ) }
\newcommand{\myname}[2]{%    \def@mylastname{#1}%    \def@myfirstname{#2}% }
\renewcommand*{\mkbibnamefamily}[1]{%   \ifboolexpr{ test {\ifdefstrequal{\namepartfamily}{@mylastname}}
               and
               test {\ifdefstrequal{\namepartgiven}{@myfirstname}}}
    {\textbf{#1}}%
    {#1}% }
\renewcommand*{\mkbibnamegiven}[1]{%   \ifboolexpr{ test {\ifdefstrequal{\namepartfamily}{@mylastname}}
               and
               test {\ifdefstrequal{\namepartgiven}{@myfirstname}}}
    {\textbf{#1}}%
    {#1}% }
\RequirePackage[colorlinks=true,allcolors=black,breaklinks=true]{hyperref}

Answer 1

To go from this "feature"

To this "un-feature"

add the code between ****** Add from here <<<<<<<<<<<<< and

********** TO HERE <<<<<<<<<<<< to your preamble.

I used the cv-lit.tex from link you provided and replaced

\makerubric{skills} by \makerubric{profex}

The the final code is

%%%%%%%%%%%%%%%
% This CV example/template is based on my own
% CV which I (lamely attempted) to clean up, so that
% it's less of an eyesore and easier for others to use.
%
% LianTze Lim (liantze@gmail.com)
% 16 September, 2016
%
\documentclass[a4paper,skipsamekey,11pt,british]{curve}
% Uncomment to enable Chinese; needs XeLaTeX
% \usepackage{ctex}
%% ********************************  Add from here  <<<<<<<<<<<<<
\makeatletter
\renewenvironment{rubric}[1]{%
    \def\raggedright{%
        @rightskip@flushglue\rightskip@rightskip\leftskip\z@skip}%
    \def\raggedleft{%
        \rightskip\z@skip\leftskip@flushglue\parfillskip\z@skip}%
    \gdef@beforespace{0pt}%
    \gdef@nextentry{}%
    \gdef@previouskey{}%
    \global\let\old@newpage\newpage%
    \global\let\old@pagebreak\pagebreak%
    \global\let\old@nopagebreak\nopagebreak
    \begin{longtable}{@{}kl@{~}X@{}}
        @rubrichead{#1}\[\rubricspace]
        \endfirsthead
        \noalign{@rubricmark{#1}%
            \global\let\in@newpage\newpage%
            \global\let\in@pagebreak\pagebreak%
            \global\let\in@nopagebreak\nopagebreak%
            \gdef\newpage{@nextentry\noalign{\gdef@nextentry{}}\in@newpage}
            \gdef\pagebreak{@nextentry\noalign{\gdef@nextentry{}}\in@pagebreak}
            \gdef\nopagebreak{@nextentry\noalign{\gdef@nextentry{}}\in@nopagebreak}}}{%
        @nextentry
    \end{longtable}\par\vspace\rubricafterspace
    \global\let\newpage\old@newpage%
    \global\let\pagebreak\old@pagebreak%
    \global\let\nopagebreak\old@nopagebreak}
\makeatother
%%% ****************************************  TO HERE <<<<<<<<<<<<
\usepackage{settings}
% Change the fonts if you want
\ifxetexorluatex % If you're using XeLaTeX or LuaLaTeX
  \usepackage{fontspec}
  %% Warning: EB Garamond contains no bold!! Substituting for Junicode Bold, but may not look nice nor consistent!!
%   \setmainfont[Ligatures=TeX,SmallCapsFeatures={Letters=SmallCaps,LetterSpace=5},BoldFont=Junicode Bold]{EB Garamond}
  %% Charis SIL's rather nice, actually.
  \setmainfont[Ligatures=TeX,SmallCapsFeatures={Letters=SmallCaps,LetterSpace=5}]{Charis SIL}
  \setsansfont[Ligatures=TeX]{Lato}
  \setmonofont{inconsolata}
\else % If you're using pdfLaTeX or latex
  \usepackage[utf8]{inputenc}
  \usepackage[T1]{fontenc}
  \usepackage[tracking=smallcaps]{microtype}
  \usepackage{fbb}
  \usepackage[type1]{cabin}
  \usepackage[varqu,varl]{zi4}
  \useosf  %% Comment out if you prefer lining figures rather than old style figures
\fi
\usepackage{csquotes}
%% Only needed if you want a Publication List
\addbibresource{own-bib.bib}
%% Specify your last name and first name (as given in the .bib) to automatically bold your own name in the publications list. One caveat: You need to write \bibnamedelima where there's a space in your name for this to work properly for now...
\myname{Lim}{Lian\bibnamedelima Tze}
% \myname{d'Andrimont}{Raphaël}
% Change the page margins if you want
% \geometry{left=1cm,right=1cm,top=1.5cm,bottom=1.5cm}
% Change the colours if you want
% \definecolor{SwishLineColour}{HTML}{00FFFF}
% \definecolor{MarkerColour}{HTML}{0000CC}
% Change the item prefix marker if you want
% \prefixmarker{$\diamond$}
%% Photo is only shown if "fullonly" is included
\includecomment{fullonly}
% \excludecomment{fullonly}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\leftheader{%
  {\LARGE\bfseries\sffamily Lim Lian Tze, Ph.D.}
\makefield{\faEnvelopeO}{\texttt{liantze@gmail.com}}
  \makefield{\faTwitter}{\texttt{@liantze}}
\makefield{\faGlobe}{\url{http://liantze.penguinattack.org/}}
\makefield{\faLinkedinSquare}
  {\url{http://www.linkedin.com/in/limliantze/}}
}
\rightheader{~}
\begin{fullonly}
\photo[r]{photo}
\photoscale{0.13}
\end{fullonly}
\title{Curriculum Vitae}
\begin{document}
\makeheaders[c]
\makerubric{employment}
\makerubric{education}
% If you're not a researcher nor an academic, you probably don't have any publications; delete this line.
%% Sometimes when a section can't be nicely modelled with the \entry[]... mechanism; hack our own and use \input NOT \makerubric
\input{publications}
%\makerubric{skills}
\makerubric{profex}
\makerubric{referee}
% \input{referee-full}
\end{document}

where the file profex.tex is

%%%%  file profex.tex
\begin{rubric}{Profesional Experiences}
\subrubric{Awards and Achievements}
\entry[2020] \textbf{Merit Award}, 25-day Standard Course SC450, Outward Bound School, Lumut, Malaysia.
%
\entry[2018] \textbf{Department Prize for Outstanding Student Performance}, Department of Computer Science, University of Warwick, United Kingdom.
\subrubric{Certifications}
\entry[2017--present] \textbf{\textsc{Triz} Level 1 Practitioner}. Awarded by MyTRIZ Innovation Association, Malaysia.
\entry[2006] \textbf{Certified IT Professional for \textsc{fitpe}} (Fundamental IT Professional Examination).  Awarded by Ministry of Higher Education Malaysia.
\subrubric{Employment}
\entry[2018--present] \textbf{Merit Award}, 25-day Standard Course SC450, Outward Bound School, Lumut, Malaysia.
%
\entry[2017--2017] \textbf{Department Prize for Outstanding Student Performance}, Department of Computer Science, University of Warwick, United Kingdom.
\entry*[2017--2016] \textbf{\textsc{Triz} Level 1 Practitioner}. Awarded by MyTRIZ Innovation Association, Malaysia.
\entry*[2016--2014] \textbf{Certified IT Professional for \textsc{fitpe}} (Fundamental IT Professional Examination).  Awarded by Ministry of Higher Education Malaysia.
\end{rubric}

UPDATE: how to use this modified template.

(1) Download the package curVe from CTAN https://ctan.org/pkg/curve?lang=en and install it.

(2) The template is in here:

https://github.com/digi-lab/pylatex-resume/tree/master/latex-cv-templates/A%2520Customised%2520CurVe%2520CV

(3) To the original cv template it must be added to its preamble the code between Add from HERE<<< to TO HERE <<<<<<<. See the simplified version.

Aside from that you need to write your own separate .tex files named employment.tex education.tex. profex.tex etc, all in the same directory with the photo.jpg, and settings.sty like this:

(Each \makerubric{<filename>} expects to find filename.tex starting with \begin{rubic}{<title>}) and ending with \end{rubic})

This is a simplified version of the modified template.

\documentclass[a4paper,skipsamekey,11pt,british]{curve}
%% ********************************  Add from HERE  <<<<<<<<<<<<<
\makeatletter
\renewenvironment{rubric}[1]{%
    \def\raggedright{%
        @rightskip@flushglue\rightskip@rightskip\leftskip\z@skip}%
    \def\raggedleft{%
        \rightskip\z@skip\leftskip@flushglue\parfillskip\z@skip}%
    \gdef@beforespace{0pt}%
    \gdef@nextentry{}%
    \gdef@previouskey{}%
    \global\let\old@newpage\newpage%
    \global\let\old@pagebreak\pagebreak%
    \global\let\old@nopagebreak\nopagebreak
    \begin{longtable}{@{}kl@{~}X@{}}
        @rubrichead{#1}\[\rubricspace]
        \endfirsthead
        \noalign{@rubricmark{#1}%
            \global\let\in@newpage\newpage%
            \global\let\in@pagebreak\pagebreak%
            \global\let\in@nopagebreak\nopagebreak%
            \gdef\newpage{@nextentry\noalign{\gdef@nextentry{}}\in@newpage}
            \gdef\pagebreak{@nextentry\noalign{\gdef@nextentry{}}\in@pagebreak}
            \gdef\nopagebreak{@nextentry\noalign{\gdef@nextentry{}}\in@nopagebreak}}}{%
        @nextentry
    \end{longtable}\par\vspace\rubricafterspace
    \global\let\newpage\old@newpage%
    \global\let\pagebreak\old@pagebreak%
    \global\let\nopagebreak\old@nopagebreak}
\makeatother
%%% ****************************************  TO HERE <<<<<<<<<<<<
\usepackage{settings}
% Change the fonts if you want
\ifxetexorluatex % If you're using XeLaTeX or LuaLaTeX
  \usepackage{fontspec}
  \setmainfont[Ligatures=TeX,SmallCapsFeatures={Letters=SmallCaps,LetterSpace=5}]{Charis SIL}
  \setsansfont[Ligatures=TeX]{Lato}
  \setmonofont{inconsolata}
\else % If you're using pdfLaTeX or latex
  \usepackage[utf8]{inputenc}
  \usepackage[T1]{fontenc}
  \usepackage[tracking=smallcaps]{microtype}
  \usepackage{fbb}
  \usepackage[type1]{cabin}
  \usepackage[varqu,varl]{zi4}
  \useosf  %% Comment out if you prefer lining figures rather than old style figures
\fi
\usepackage{csquotes}
\myname{Lim}{Lian\bibnamedelima Tze}
\includecomment{fullonly}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\leftheader{%
  {\LARGE\bfseries\sffamily Lim Lian Tze, Ph.D.}
\makefield{\faEnvelopeO}{\texttt{liantze@gmail.com}}
  \makefield{\faTwitter}{\texttt{@liantze}}
\makefield{\faGlobe}{\url{http://liantze.penguinattack.org/}}
\makefield{\faLinkedinSquare}
  {\url{http://www.linkedin.com/in/limliantze/}}
}
\rightheader{~}
\begin{fullonly}
\photo[r]{photo} %
\photoscale{0.13}
\end{fullonly}
\title{Curriculum Vitae}
\begin{document}
\makeheaders[c]
\makerubric{employment} % uses file employment.tex
\makerubric{education}  % uses file education.tex
\makerubric{profex} % needs file profex.tex <<<<<<<<<<<<<<<<<<<<
\makerubric{referee}% uses file referee.tex
\end{document}