I have following table
\documentclass[a4paper, 11pt, parskip]{scrreprt}
\usepackage{graphicx}
\usepackage{colortbl}
\usepackage{xcolor}
\usepackage{multirow}
\usepackage{makecell}%To keep spacing of text in tables
\setcellgapes{3pt}%parameter for the spacing
\newcommand{\specialcell}[2][c]{%
\begin{tabular}[#1]{@{}c@{}}#2\end{tabular}}
\begin{document}
\begin{table}[h]
%\makegapedcells
\centering
\resizebox{\textwidth}{!}{%resizing the whole table
\begin{tabular}{|c|c|c|c|c|c|c|c|c|}
\hline
\multicolumn{9}{|c|}{\Huge Relaisplatine} \\
\hline
Relay Nr. & Part & Test-Id & \specialcell[c]{Signal-Name \\for Testcases} & Conn. & Pin & \specialcell[c]{Pin-\\Func.} & R Value & \specialcell[c]{Influenced \\ Signal/Voltage } \\
\hline
\rowcolor[gray]{0.8}
& & & & & 1 & N.C. & Open & Open \\
\cline{6-9}
%\hline
0 & WFB & WFB\_VOLT\_SDAR & WFB\_CLOCK\_+1V8 & P2 & 3 & COM & 0 $\Omega$ & SIGN02659 \\
\cline{6-9}
%\hline
& & & & & 5 & N.O. & 0 $\Omega$ & GND \\
%\cline{6-9}
\hline
& & & & & 7 & N.C. & Open & Open \\
\cline{6-9}
1 & WFB & WFB\_CLK & WFB\_CLKDIS153\_MUXOUT & P2 & 9 & COM & 0 $\Omega$ & P5801 \\
\cline{6-9}
& & & & & 11 & N.O. & 0 $\Omega$ & P5802 \\
\hline
& & & & & 13 & N.C. & Open & Open \\
\cline{6-9}
2 & WFB & WFB\_VOLT\_SDAR & WFB\_WF\_FPGA\_VCORE & P2 & 15 & COM & 0 $\Omega$ & SIGN02652 \\
\cline{6-9}
& & & & & 17 & N.O. & 0 $\Omega$ & GND \\
\hline
& & & & & & N.C. & Open & Open \\
\cline{6-9}
3 & RIO & RIO\_T2\_DATA & RIO\_T2\_DATA & P3 & PCB-Cable & COM & 0 $\Omega$ & RIO\_GPP\_I2C\_SDA \\
\cline{6-9}
& & & & & PCB-Cable & N.O. & 0 $\Omega$ & GND \\
\hline
& & & & & & N.C. & Open & Open \\
\cline{6-9}
4 & & & & P3 & & COM & 0 $\Omega$ & \\
\cline{6-9}
& & & & & PCB-Cable & N.O. & 0 $\Omega$ & GND \\
\hline
& & & & & 14 & N.C. & Open & Open \\
\cline{6-9}
5 & RIO & RIO\_T1\_CLK & RIO\_T1\_CLK & P2 & 16 & COM & 0 $\Omega$ & RIO\_GPP\_I2C\_SCL1 \\
\cline{6-9}
& & & & & 18 & N.O. & 0 $\Omega$ & \\
\hline
& & & & & 8 & N.C. & Open & Open \\
\cline{6-9}
6 & WFB & WFB\_VOLT\_SDAR & WFB\_WF\_FPGA\_MGTVCCAUX & P2 & 10 & COM & 0 $\Omega$ & SIGN02672 \\
\cline{6-9}
& & & & & 12 & N.O. & 0 $\Omega$ & \\
\hline
& & & & & 2 & N.C. & Open & Open \\
\cline{6-9}
7 & WFB & WFB\_VOLT\_SDAR & WFB\_WF\_FPGA\_AVTT & P2 & 4 & COM & 0 $\Omega$ & SIGN02661 \\
\cline{6-9}
& & & & & 6 & N.O. & 0 $\Omega$ & Open \\
\hline
\end{tabular}
}
\caption{Verkabelung der ersten Relaisplatine an X400/PortA}
\end{table}
\end{document}
As you can see the Title of the table, called Relaisplatine, is touching the table borders.
To tackle this problem i used \makegapedcells, but if I use it, it disables the coloring of the row.
How can I make the title not touch the borderlines and have colored rows?
\multicolumn{9}{|c|}{\gape{\Huge Relaisplatine}}. The colored row will the stay colored. Oh, and please make your code a complete MWE. – Mike Jul 05 '17 at 22:12\specialcell? – Zarko Jul 07 '17 at 09:59\tinyfont size can be fit in the text width. Consider to rotate table for 90 degree and use normal size font. Otherwise the table content one can read only with help of magnifying glass :( – Zarko Jul 07 '17 at 10:17\specialcellwas missing. I used it to get linebreaks inside a cell. I will consider rotating it, thanks for the tip. – SiGa Jul 07 '17 at 11:08\gape{}is solving my problem, thanks. Could you post it as answer? – SiGa Jul 07 '17 at 11:37