How to replace ${} placeholders in a text file?

Question

I want to pipe the output of a "template" file into MySQL, the file having variables like ${dbName} interspersed. What is the command line utility to replace these instances and dump the output to standard output?

Answer 1

Update

Here is a solution from yottatsa on a similar question that only does replacement for variables like $VAR or ${VAR}, and is a brief one-liner

i=32 word=foo envsubst < template.txt

Of course if i and word are in your environment, then it is just

envsubst < template.txt

On my Mac it looks like it was installed as part of gettext and from MacGPG2

Old Answer

Here is an improvement to the solution from mogsie on a similar question, my solution does not require you to escale double quotes, mogsie's does, but his is a one liner!

eval "cat <<EOF
$(<template.txt)
EOF
" 2> /dev/null

The power on these two solutions is that you only get a few types of shell expansions that don't occur normally $((...)), `...`, and $(...), though backslash is an escape character here, but you don't have to worry that the parsing has a bug, and it does multiple lines just fine.

Answer 2

Sed!

Given template.txt:

The number is ${i}
The word is ${word}

we just have to say:

sed -e "s/\${i}/1/" -e "s/\${word}/dog/" template.txt

Thanks to Jonathan Leffler for the tip to pass multiple -e arguments to the same sed invocation.

Answer 3

Use /bin/sh. Create a small shell script that sets the variables, and then parse the template using the shell itself. Like so (edit to handle newlines correctly):

File template.txt:

the number is ${i}
the word is ${word}

File script.sh:

#!/bin/sh

#Set variables
i=1
word="dog"

#Read in template one line at the time, and replace variables (more
#natural (and efficient) way, thanks to Jonathan Leffler).
while read line
do
    eval echo "$line"
done < "./template.txt"

Output:

#sh script.sh
the number is 1
the word is dog

Answer 4

I was thinking about this again, given the recent interest, and I think that the tool that I was originally thinking of was m4, the macro processor for autotools. So instead of the variable I originally specified, you'd use:

$echo 'I am a DBNAME' | m4 -DDBNAME="database name"

Answer 5

Create rendertemplate.sh:

#!/usr/bin/env bash

eval "echo \"$(cat $1)\""

And template.tmpl:

Hello, ${WORLD}
Goodbye, ${CHEESE}

Render the template:

$ export WORLD=Foo
$ CHEESE=Bar ./rendertemplate.sh template.tmpl 
Hello, Foo
Goodbye, Bar

Answer 6

template.txt

Variable 1 value: ${var1}
Variable 2 value: ${var2}

data.sh

#!/usr/bin/env bash
declare var1="value 1"
declare var2="value 2"

parser.sh

#!/usr/bin/env bash

# args
declare file_data=$1
declare file_input=$2
declare file_output=$3

source $file_data
eval "echo \"$(< $file_input)\"" > $file_output

./parser.sh data.sh template.txt parsed_file.txt

parsed_file.txt

Variable 1 value: value 1
Variable 2 value: value 2

Answer 7

Here's a robust Bash function that - despite using eval - should be safe to use.

All ${varName} variable references in the input text are expanded based on the calling shell's variables.

Nothing else is expanded: neither variable references whose names are not enclosed in {...} (such as $varName), nor command substitutions ($(...) and legacy syntax `...`), nor arithmetic substitutions ($((...)) and legacy syntax $[...]).

To treat a $ as a literal, \-escape it; e.g.:\${HOME}

Note that input is only accepted via stdin.

Example:

$ expandVarsStrict <<<'$HOME is "${HOME}"; `date` and \$(ls)' # only ${HOME} is expanded
$HOME is "/Users/jdoe"; `date` and $(ls)

Function source code:

expandVarsStrict(){
  local line lineEscaped
  while IFS= read -r line || [[ -n $line ]]; do  # the `||` clause ensures that the last line is read even if it doesn't end with \n
    # Escape ALL chars. that could trigger an expansion..
    IFS= read -r -d '' lineEscaped < <(printf %s "$line" | tr '`([$' '\1\2\3\4')
    # ... then selectively reenable ${ references
    lineEscaped=${lineEscaped//$'\4'{/\${}
    # Finally, escape embedded double quotes to preserve them.
    lineEscaped=${lineEscaped//\"/\\\"}
    eval "printf '%s\n' \"$lineEscaped\"" | tr '\1\2\3\4' '`([$'
  done
}

^{The function assumes that no 0x1, 0x2, 0x3, and 0x4 control characters are present in the input, because those chars. are used internally - since the function processes text, that should be a safe assumption.}

Answer 8

here's my solution with perl based on former answer, replaces environment variables:

perl -p -e 's/\$\{(\w+)\}/(exists $ENV{$1}?$ENV{$1}:"missing variable $1")/eg' < infile > outfile

Answer 9

I would suggest using something like Sigil: https://github.com/gliderlabs/sigil

It is compiled to a single binary, so it's extremely easy to install on systems.

Then you can do a simple one-liner like the following:

cat my-file.conf.template | sigil -p $(env) > my-file.conf

This is much safer than eval and easier then using regex or sed

Answer 10

Here is a way to get the shell to do the substitution for you, as if the contents of the file were instead typed between double quotes.

Using the example of template.txt with contents:

The number is ${i}
The word is ${word}

The following line will cause the shell to interpolate the contents of template.txt and write the result to standard out.

i='1' word='dog' sh -c 'echo "'"$(cat template.txt)"'"'

Explanation:

• i and word are passed as environment variables scopped to the execution of sh.
• sh executes the contents of the string it is passed.
• Strings written next to one another become one string, that string is:
  • 'echo "' + "$(cat template.txt)" + '"'
• Since the substitution is between ", "$(cat template.txt)" becomes the output of cat template.txt.
• So the command executed by sh -c becomes:
  • echo "The number is ${i}\nThe word is ${word}",
  • where i and word are the specified environment variables.

Answer 11

If you are open to using Perl, that would be my suggestion. Although there are probably some sed and/or AWK experts that probably know how to do this much easier. If you have a more complex mapping with more than just dbName for your replacements you could extend this pretty easily, but you might just as well put it into a standard Perl script at that point.

perl -p -e 's/\$\{dbName\}/testdb/s' yourfile | mysql

A short Perl script to do something slightly more complicated (handle multiple keys):

#!/usr/bin/env perl
my %replace = ( 'dbName' => 'testdb', 'somethingElse' => 'fooBar' );
undef $/;
my $buf = <STDIN>;
$buf =~ s/\$\{$_\}/$replace{$_}/g for keys %replace;
print $buf;

If you name the above script as replace-script, it could then be used as follows:

replace-script < yourfile | mysql

Answer 12

file.tpl:

The following bash function should only replace ${var1} syntax and ignore 
other shell special chars such as `backticks` or $var2 or "double quotes". 
If I have missed anything - let me know.

script.sh:

template(){
    # usage: template file.tpl
    while read -r line ; do
            line=${line//\"/\\\"}
            line=${line//\`/\\\`}
            line=${line//\$/\\\$}
            line=${line//\\\${/\${}
            eval "echo \"$line\""; 
    done < ${1}
}

var1="*replaced*"
var2="*not replaced*"

template file.tpl > result.txt

Answer 13

Lots of choices here, but figured I'd toss mine on the heap. It is perl based, only targets variables of the form ${...}, takes the file to process as an argument and outputs the converted file on stdout:

use Env;
Env::import();

while(<>) { $_ =~ s/(\${\w+})/$1/eeg; $text .= $_; }

print "$text";

Of course I'm not really a perl person, so there could easily be a fatal flaw (works for me though).

Answer 14

I found this thread while wondering the same thing. It inspired me to this (careful with the backticks)

$ echo $MYTEST
pass!
$ cat FILE
hello $MYTEST world
$ eval echo `cat FILE`
hello pass! world

Answer 15

It can be done in bash itself if you have control of the configuration file format. You just need to source (".") the configuration file rather than subshell it. That ensures the variables are created in the context of the current shell (and continue to exist) rather than the subshell (where the variable disappear when the subshell exits).

$ cat config.data
    export parm_jdbc=jdbc:db2://box7.co.uk:5000/INSTA
    export parm_user=pax
    export parm_pwd=never_you_mind

$ cat go.bash
    . config.data
    echo "JDBC string is " $parm_jdbc
    echo "Username is    " $parm_user
    echo "Password is    " $parm_pwd

$ bash go.bash
    JDBC string is  jdbc:db2://box7.co.uk:5000/INSTA
    Username is     pax
    Password is     never_you_mind

If your config file cannot be a shell script, you can just 'compile' it before executing thus (the compilation depends on your input format).

$ cat config.data
    parm_jdbc=jdbc:db2://box7.co.uk:5000/INSTA # JDBC URL
    parm_user=pax                              # user name
    parm_pwd=never_you_mind                    # password

$ cat go.bash
    cat config.data
        | sed 's/#.*$//'
        | sed 's/[ \t]*$//'
        | sed 's/^[ \t]*//'
        | grep -v '^$'
        | sed 's/^/export '
        >config.data-compiled
    . config.data-compiled
    echo "JDBC string is " $parm_jdbc
    echo "Username is    " $parm_user
    echo "Password is    " $parm_pwd

$ bash go.bash
    JDBC string is  jdbc:db2://box7.co.uk:5000/INSTA
    Username is     pax
    Password is     never_you_mind

In your specific case, you could use something like:

$ cat config.data
    export p_p1=val1
    export p_p2=val2
$ cat go.bash
    . ./config.data
    echo "select * from dbtable where p1 = '$p_p1' and p2 like '$p_p2%' order by p1"
$ bash go.bash
    select * from dbtable where p1 = 'val1' and p2 like 'val2%' order by p1

Then pipe the output of go.bash into MySQL and voila, hopefully you won't destroy your database :-).

Answer 16

In place perl editing of potentially multiple files, with backups.

  perl -e 's/\$\{([^}]+)\}/defined $ENV{$1} ? $ENV{$1} : ""/eg' \
    -i.orig \
    -p config/test/*

Answer 17

I created a shell templating script named shtpl. My shtpl uses a jinja-like syntax which, now that I use ansible a lot, I'm pretty familiar with:

$ cat /tmp/test
{{ aux=4 }}
{{ myarray=( a b c d ) }}
{{ A_RANDOM=$RANDOM }}
$A_RANDOM
{% if $(( $A_RANDOM%2 )) == 0 %}
$A_RANDOM is even
{% else %}
$A_RANDOM is odd
{% endif %}
{% if $(( $A_RANDOM%2 )) == 0 %}
{% for n in 1 2 3 $aux %}
\$myarray[$((n-1))]: ${myarray[$((n-1))]}
/etc/passwd field #$n: $(grep $USER /etc/passwd | cut -d: -f$n)
{% endfor %}
{% else %}
{% for n in {1..4} %}
\$myarray[$((n-1))]: ${myarray[$((n-1))]}
/etc/group field #$n: $(grep ^$USER /etc/group | cut -d: -f$n)
{% endfor %}
{% endif %}


$ ./shtpl < /tmp/test
6535
6535 is odd
$myarray[0]: a
/etc/group field #1: myusername
$myarray[1]: b
/etc/group field #2: x
$myarray[2]: c
/etc/group field #3: 1001
$myarray[3]: d
/etc/group field #4: 

More info on my github

Answer 18

To me this is the easiest and most powerful solution, you can even include other templates using the same command eval echo "$(<template.txt):

Example with nested template

1. create the template files, the variables are in regular bash syntax ${VARIABLE_NAME} or $VARIABLE_NAME

you have to escape special characters with \ in your templates otherwhise they will be interpreted by eval.

template.txt

Hello ${name}!
eval echo $(<nested-template.txt)

nested-template.txt

Nice to have you here ${name} :\)

2. create source file

template.source

declare name=royman 

3. parse the template

source template.source && eval echo "$(<template.txt)"

4. the output

Hello royman!
Nice to have you here royman :)

---