Trying to get index of active cell from textField inside custom cell of UITableView in iOS

Question

I have a UITableView in my application where I have custom UITableViewCell which contains a UITextField. What I would like to do is get the correct index of the row when I select a particular textfield from that row. Unfortunately, I am only able to get the correct index of the row if I actually click on the row, and not when I select the textfield itself. I am implementing the <UITextFieldDelegate>, and when I select a particular UITextField, I call the method:

- (BOOL)textFieldShouldBeginEditing:(UITextField *)textField {

    int rowTest = [_table indexPathForSelectedRow].row;
    int rowTest1 = [_cell.tireCodeField tag];

    NSLog(@"the current row is: %d", rowTest1);
    NSLog(@"and this row is: %d", rowTest);  

    return YES;

}

The problem is that the value for the row that I am getting is from whenever the method:

- (void) tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {

   ...

}

get's called. It is as if there is a disconnect between the UITextField and the row in the table it resides in. Is there a way for me to select a particular textField, and get the

Is there a way for me to get the index of the row by selecting the UITextField that resides within it, instead of selecting the row itself?

Thanks in advance to all who reply.

set the `textField.tag = indexPath.row` in `-tableView:cellForRowAtIndexPath` method — Elf Sundae, Aug 15 '13 at 15:07
Thanks very much for your comment, but I already am doing this. — syedfa, Aug 15 '13 at 15:23

score 8 · Accepted Answer · answered Aug 15 '13 at 15:08

8

The way this is usually done, is to give the text field a tag equal to the indexPath.row, or if you have multiple sections, some mathematical combination of the section and row (like 1000*indexPathSection + indexPath.row).

answered Aug 15 '13 at 15:08

rdelmar

103,582
11
205
218

I do that in my cellForRowAtIndexPath method, but as i said, this value only seems to change when I select didSelectRowAtIndexPath. – syedfa Aug 15 '13 at 15:18
@syedfa, I don't understand what you mean by "it only changes when I select didSelectRowAtIndexPath". You shouldn't be checking _cell.tireCodeField.tag, just textField.tag – rdelmar Aug 15 '13 at 15:24
It turns out that I had to use an offset value when setting the .tag value for the textfield. So in my cellForRowAtIndexPath method, I had to change my code to: cell.textField.tag = indexPath.row+50; and then in my textFieldShouldBeginEditing method, I did this: int row = textField.tag-50; It was only after doing this did it start working! – syedfa Aug 15 '13 at 16:12
@syedfa, using int row = textField.tag should have worked by itself. Did you try it that way? Sometimes it is necessary to use an offset, but usually only to avoid conflict with other views with tags. – rdelmar Aug 15 '13 at 16:56

score 7 · Answer 2 · edited May 23 '17 at 12:10

7

Well, assuming that the cell is the direct superview or the text field, you can directly ask for the text field's superview, cast to UITableViewCell, and then ask your instance of UITableView for the index path of that cell. Here's an example:

- (BOOL)textFieldShouldBeginEditing:(UITextField *)textField
{
    UITableViewCell *cell = (UITableViewCell *)textField.superview; // cell-->textfield
    //UITableViewCell *cell = (UITableViewCell *)textField.superview.superview; // cell-->contentView-->textfield
    NSIndexPath *indexPath = [self.tableView indexPathForCell:cell];

    return YES;
}

If you're looking for a more dynamic solution that works across multiple versions of iOS, then you'll probably want to use the following quoted from @Marko Nikolovski here

// Get the cell in which the textfield is embedded
id textFieldSuper = textField;

while (![textFieldSuper isKindOfClass:[UITableViewCell class]]) {
    textFieldSuper = [textFieldSuper superview];
}

// Get that cell's index path
NSIndexPath *indexPath = [self.tableView indexPathForCell:(UITableViewCell *)textFieldSuper];

This method crawls up the superview until it encounters a UITableViewCell. This keeps the code working even when the cell's view hierarchy changes, like it did from iOS 6 to 7.

edited May 23 '17 at 12:10

Community

1
1

answered Aug 15 '13 at 14:53

Mick MacCallum

126,953
40
282
279

Thanks very much for your response. If I'm using a custom UITableViewCell, do I use that class to call the superview of the textfield, or do I use UITableViewCell as you mentioned above? – syedfa Aug 15 '13 at 15:33
1

@syedfa Yes, you use your subclass. – Mick MacCallum Aug 15 '13 at 16:11
This seems to have stopped working with IOS7. Any ideas? – T.J. Dec 19 '13 at 20:49
@T.J. Try `superview.superview`. The view hierarchy of the cell changed in iOS 7, I don't remember the specific changes, but just keep crawling up the superview chain until you hit a `UITableViewCell`. – Mick MacCallum Dec 19 '13 at 20:50
1

I found a good solution here which crawls up the chain programmatically: http://stackoverflow.com/a/18980944/971518. – T.J. Dec 19 '13 at 20:54
@T.J. Perfect. I'll add a link to that in my answer. – Mick MacCallum Dec 19 '13 at 20:57

score 4 · Answer 3 · edited May 23 '17 at 11:47

I thought I'd post this slightly (!) late answer as I was trying to do this for ages and then remember another method (which if I say so myself is one of the best ways) of getting the index path for a cell when a UIButton was tapped.

In a similar way you can get the CGPoint of the cell.

-(NSIndexPath *)indexPathForTextField:(UITextField *)textField
{
    CGPoint point = [textField convertPoint:CGPointZero toView:self.tableView];
    return [self.tableView indexPathForRowAtPoint:point];
}

-(void)textDidChangeForTextFieldInCell:(UITextField *)textField
{
    NSIndexPath *indexPath = [self indexPathForTextField:textField];
    // Now you can update the object at indexPath for your model!
}

I think this is far neater than relying on tags or the even yuckier method of looking at superviews!

Thanks for taking the time to provide this solution. Better late than never :-) — syedfa, Apr 21 '14 at 20:41

score 1 · Answer 4 · answered Nov 22 '14 at 17:54

As it seems you are working with tags,using the UITextFieldDelegate,you can declare this methods in order to select the row.

-(void)textFieldDidBeginEditing:(UITextField *)textField{

int rowTest1 = textField.tag;

[myTableview selectRowAtIndexPath:[NSIndexPath indexPathForRow:rowTest1 inSection:0] animated:YES scrollPosition:UITableViewScrollPositionNone];

}

-(void)textFieldDidEndEditing:(UITextField *)textField{
[textField resignFirstResponder];
}

score -1 · Answer 5 · edited Jan 20 '14 at 09:29

-1

UITableViewCell *textFieldCell = (UITableViewCell*) [[[textfield superview]superview]superview];
    NSIndexPath *indexPath = [self.editProfileTableView indexPathForCell:textFieldCell];

edited Jan 20 '14 at 09:29

CloudyMarble

36,156
70
93
127

answered Jan 20 '14 at 09:12

AP_

953
11
13

Trying to get index of active cell from textField inside custom cell of UITableView in iOS

5 Answers5

Linked