2

I have a stereo track that was recorded in a dslr camera using a lavalier mic. The right channel has all the voice information (along with a lot of noise) and the left channel has only noise. I tried to invert the left channel to see if it would cancel the noise from the other channel, but it didn't help. But I don't know if I did it right. Do you think there is some way I can use the noise information from the left channel to help me clean the channel that has the actual information I need? If it helps, I know this noise comes from the camera. It's a constant hiss in both channels.

Thank you!

Marina
  • 21
  • 1

1 Answers1

3

To fully discard the option of the method you tried make sure that before you invert the phase of the left channel you bring both channels to the center field; then you invert the phase and judge if its working or not.

However, your best bet will be an audio repair/restore plugin (or hardware), perhaps Izotope - RX de-noiser, spectral repair or Waves x or z denoiser.

"Do you think there is some way I can use the noise information from the left channel to help me clean the channel that has the actual information I need?"

Yes, if the noise is exactly the same as the noise in the right channel, you can feed the left channel's noise to these de-noiser plugins so they "learn" the noise, and then they will apply their algorithms to remove the "learned" noise from the audio you want to clean.

JSmith
  • 1,103
  • 8
  • 24
Andrés G. Duarte
  • 59
  • 4