Headphone amp sliders are making noise. Worth fixing or not?

Question

I recently replaced my interface (that had two headphone jacks and volume pots) with a new interface that only has one of each. My next move was to pull my 13-year-old Rolls HA-43 headphone amp out of the box-o-cables-and-stuff. I noticed that there's a crackling noise audible when you change the volume on any of the sliders.

Here's the weird part: This happens on all of them. (Will double-check that it's all four channels, and not just the first two.) In the same way. And I'm fairly certain that it didn't used to make that noise.

What might have caused this? Is it worthwhile to diagnose and fix, or should I just toss it out and buy a new one?

score 6 · Accepted Answer · answered May 02 '11 at 02:24

6

Volume knobs have a tendency to get "scratchy" over time. This is caused by corrosion and dirt in the inner workings.

It's definitely worth fixing. You can get a can of DeoxIT contact cleaner for about $15.

Just unplug the unit, open the case and spray the backs of the potentiometers. Usually there is a small hole where you can use the tube that comes with the DeoxIT to get the insides really good. Turn all the knobs all the way up and down. Let it dry completely before plugging it back in.

answered May 02 '11 at 02:24

Friend Of George

3,484
1
12
17

Sprayed the faders tonight; they're the open kind, so I sprayed the sides gently and worked the faders forward and back. Will let it dry overnight and try it out in the morning and report back. – Goodbye Stack Exchange May 04 '11 at 06:01
The store had two different kinds of DeoxIT, one that was $10 and another "gold" DeoxIT that was $15. I got the cheaper one, but is there any significant difference between the two? – Goodbye Stack Exchange May 04 '11 at 06:03
I really don't know what the difference is. I got the cheaper one to do the knobs on an old Kenwood amp which I use for my monitors, but I have not gotten the chance to use it yet. – Friend Of George May 04 '11 at 13:47
Seven months later, it's still working excellently. Will this also work on guitar/bass pots? – Goodbye Stack Exchange Dec 17 '11 at 01:07
I would expect it to work on any pots. – Friend Of George Dec 17 '11 at 04:29
1

@NeilFein I just found out the difference between DeoxID and DeoxIT gold. The gold version is for plated contacts. You can read about it in the product description. – Friend Of George Apr 23 '12 at 12:43

Headphone amp sliders are making noise. Worth fixing or not?

1 Answers1