3

How was the formula (3) for viscosity index $\mathrm{VI}$ derived in section 5. Procedure A—Oils of Viscosity Index Up to and Including 100 [1]? Specifically with reference to the reference oils considered and the table for it.

$$\mathrm{VI} = \frac{L - U}{L - H} \times 100$$

References

  1. D02 Committee. ASTM D2270 - 04 Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 and 100 °C; ASTM International. DOI: 10.1520/D2270-04. (PDF)
andselisk
  • 37,604
  • 14
  • 131
  • 217
Sirius
  • 31
  • 1

1 Answers1

1

back when it was invented they measured all the oils they could find. They got the worst (most viscosity change) and the best in each group and ranked these as 0 to 100. All others were plotted on this "linear" scale.

The unit was used for dome time until the best was bettered, then they invented VIE (E is a subscript, and stands for extension, strictly all VI's above 100 are VIE's).

It is a horrid unit because it is far from having any useful meaning, unfortunately it has some significance.

user66897
  • 11
  • 2